How to design a subwoofer box for your car using WinISD Pro!

WinISD Pro

Join our mailing list

Stay up to date with latest software releases, news, software discounts, deals and more.

Subscribe
Download WinISD Pro 0.50 Alpha 7

WinISD Pro

  -  1.84 MB  -  Freeware
  • Latest Version

    WinISD Pro 0.50 Alpha 7 LATEST

  • Review by

    Sophia Jones

  • Operating System

    Windows XP / Vista / Windows 7

  • User Rating

    Click to vote
  • Author / Product

    Juha Hartikainen / External Link

  • Filename

    winisdalpha.exe

  • MD5 Checksum

    05438d14bfee2a093982580e7c77122d

WinISD Pro is a program that lets you design loudspeaker enclosures out of raw materials. The process is quite simple, regardless of whether you’re using complex woofer boxes or standard cabinets.

Loudspeakers can be described as electro-acoustic transducers that take electrical audio signals and converts them into louder sounds for us to hear.

Only a Few Steps Needed

There are several types of loudspeakers that exist. The most common one is a paper cone with a voice coil electromagnet and permanent magnet.

If you need sound to have high fidelity reproduction, then you can use several loudspeakers together. One audible frequency range component is reproduced by each loudspeaker. There are also separate electrodynamic drivers that allow for a fine performance and not much pitch range.

Different types of drivers like tweeters, mid-range drivers, woofers, and subwoofers are usually combined to form a comprehensive loudspeaker system that performs optimally.

Some Technical Experience is Helpful

The average loudspeaker system has drivers that are mounted inside of a cabinet or enclosure. The latter is where drivers are physically mounted, and where sound waves are averted when they’re coming from behind the driver. That way, these sound waves don’t interfere with the ones coming from the opposite side.

WinISD Pro lets you create the best loudspeaker enclosure possible. However, you’ll need to have a little bit of technological knowledge. It all depends on how complicated your project is.

A cabinet is more than a box filled with loudspeakers. Every small detail is considered, such as the wiring connections, binding posts, chassis hardening, and where to mount the speakers.

Learn Before You Begin

To develop the best loudspeaker enclosure possible, you need certain knowledge to help you flesh out your idea. This is knowledge in which the program won’t provide to you. All the program does is make the process easier, so you can come up with the best decision possible.

  • WinISD Pro 0.50 Alpha 7 Screenshots

    The images below have been resized. Click on them to view the screenshots in full size.

What's new in this version:

New:
- If project file is changed, program now asks if user wants to save the project.
- Added voice coil thermal simulation fields. Now you can simulate effect of voice coil heating based on temperature rise that you specify. You can also specify resistance temperature coefficient of voice coil material.
- Added several alignment options for closed and vented box. Program now suggests different alignments based on Qts value.
- Box alignment calculation now considers external resistance and reduction of Q as box has some absorption loss. Leak losses are not considered when calculating alignments.
- Added passive radiator extra mass dragging for passive radiator. Dragging vertically changes passive radiator extra mass => tuning frequency is changed. This requires that you enter some initial extra mass for passive radiator for this to work.
- Added showing of air density value to "Environment tab".
- Added option to "cross-calculate" vents. User can now specify physical vent properties, and tuning frequency is calculated according that length. This can help when studying existing boxes. No more guesswork.
- When changing environment values, physical vent dimensions stay constant, and box tuning is recalculated. This allows you to investigate temperature sensitivity of your design.
- Added calculation of first port resonance frequency. This shows frequency of first "organ pipe" resonance. Others are multiplies of this frequency.
- Added option to change end correction factor.
- Added drawing of -3 dB line.
- Added drawing of excursion limit.
- Added option to configure rms, peak or peak-to-peak excursion and air velocities.
- Added calculation of off-axis responses. User can now specify off-axis angle.
- Added simulation of various types of prototype filters. This is very nice feature, since now you can add various combinations of these filters, and see their combined impact on frequency response (magnitude and phase), cone excursion and group delay. You can also plot frequency response or group delay of equalizer/filter chain.
- EQ/Filter transfer function magnitude plot has its own plot limits.
- Added option relative cursor readings. Just doubleclick in plot window after setting to reference point to enable relative cursor readings.
- Added option to change and specify voice coil connection mode, all VCs in parallel or in series.
- Added amplifier apparent power graph. This shows apparent power taken from the feeding amplifier, to assess amplifier loading.
- Added parameter tracking to the driver editor. Now driver editor tracks which parameters were entered and which were calculated.
- Driver editor now internally recalculates all calculated parameters, when user enters new value for already entered parameter. This makes easy to correct entries.
- Driver editor now checks all parameters by calculating through all relations between parameters. This assures that data is always correct.

Changes:
- Moved "check internet for new version" under "Help/online" menu
- Changed online support to point forums instead of email
- Changed text "Frc" to "Fsc" for more consistency, like Qts => Qtc
- Calculation of models rewritten for better clarity

Bugs fixed:
- 'New project'-window now remembers last driver
- Many cosmetic fixes
- Fixed toolbar colours if user was using customized colour scheme
- Fixed bug where certain editboxes were hard to edit by hand (program was overwriting what you just typed)

Join our mailing list

Stay up to date with latest software releases, news, software discounts, deals and more.

Subscribe