WD SSD Dashboard 2.5.1.0

If you own a WD SSD this program will help you keep your hardware fast and optimized! The Western Digital Dashboard for PC helps users maintain peak performance of the Western Digital drives in Windows® operating systems with a user-friendly graphical interface for the user. The Western Digital Dashboard includes tools for analysis of the disk (including the disk model, capacity, firmware version, and SMART attributes) and firmware updates.

Supported Operating Systems

• Windows 11 32/64-bit versions
• Windows 10 32/64-bit versions
• Windows 8.1 32/64-bit versions
• Windows 7 32/64-bit versions

Instructions

• Download the Western Digital Dashboard to your hard drive
• Run the downloaded installer by double clicking DashboardSetup.exe
• Follow the onscreen prompts to complete the installation
• When the installation has completed successfully, click on the Finish button
• The Dashboard will automatically launch and load the Status section

Data backup recommendations for updating firmware using the WD SSD Dashboard
The firmware update should not affect data on the app. However, there is a very slight chance a firmware update may result in data loss. Because of this, WD highly recommends backing up all data before initiating the firmware update.

Troubleshooting an SSD that is not detected by the WD Dashboard
The app Dashboard only supports WD brand SSD products. Please ensure the app and cables are connected properly. Click on the Rescan button of the Dashboard to scan the system for connected WD SSDs, or close and restart the WDSSD Dashboard program.