Syncovery 11.5.0 (32-bit)

What's new in this version:

Syncovery 11.5.0 (32-bit)
- The Remote Service will now use the separate communication folder for hash files too, if specified. Previously it was only for the remote listing.
- The Remote Service can now generate SHA256 hashes (choose them on the Verification tab sheet in the Syncovery profile)
- A few PascalScript enhancements
- Additional minor improvements


Syncovery 11.4.5 (32-bit)
- The Scheduler now shows the number of currently running jobs (profiles)
- Uploading to Azure BLOB storage will now use larger blocks if the maximum part size on the Program Settings dialog, tab sheet “Cloud” is raised
- Jobs that copy NTFS permissions will now perform folder operations in a single thread rather than multithreaded to avoid problems with inheritance
- Fixes a bug where the calculated percentage of deletions was logged as being over 100%
- Prevents excessive logging of SSH/SFTP related details
- RSync connections will now use the port specified, and there’s been a bug fix for using rsync over SSH
- M365 connections for email notifications now work in the web GUI again


Syncovery 11.4.4 (32-bit)
- Change log not available for this version


Syncovery 11.4.3 (32-bit)
- Change log not available for this version


Syncovery 11.4.1 (32-bit)
- Fixes an issue where the timeout for S3 uploads would be only 10 seconds rather than 60


Syncovery 11.4.0 (32-bit)
- Is more resilient against Internet diconnections, especially when uploading huge files to S3 cloud servers
- OpenSSL errors are now logged and handled more correctly

You can use the following PascalScript to enable deleting files that do not match the filters on both sides of the sync (if the job is two-way):
- function OnProfileStart:Boolean
- begi
- SetProfileProperty('DeleteNonMatchingFilters','Yes')
- SetProfileProperty('DeleteNonMatchingFiltersBothSides','Yes')
- Result:=true
- Miscellaneous additional improvements


Syncovery 11.3.5 (32-bit)
- Change log not available for this version


Syncovery 11.3.4 (32-bit)
- The statistics verification no longer performs binary comparisons if these verifications are active in a profile
- The Setup program is now also aware that SyncoveryCL.exe is the new scheduler service and doesn’t replace it with SyncoveryService.exe any more
- Fixes the scheduler service not starting up after rebooting Windows on very old CPUs (likely this problem occurred only if newer Windows Server versions were running only pre-2013 CPUs that didn’t completely fulfill the system requirements)
- When the daily run time for a profile was changed, Syncovery might sometimes have reported the next run as being tomorrow rather than today. This was fixed.
- Fixes an issue where the Next Run might not be updated in the Profile Overview after a profile run unless you closed the GUI or switched to the Scheduler tab sheet and back


Syncovery 11.3.3 (32-bit)
- Contains numerous improvements and fixes to the cloud to cloud copying mode without temporary files. Most importantly, it now handles files correctly when the size is different from what was reported in the folder listing. Especially Sharepoint can regularly report smaller file sizes in a folder listing than the files actually are. Previous Syncovery 11 versions may have copied incomplete files in such cases.


Syncovery 11.3.2 (32-bit)
- Change log not available for this version


Syncovery 11.3.1 (32-bit)
- Fixes uploading empty files to PCloud
- Is more resilient against losing cloud authentication due connectivity error or other errors that the cloud server may produce


Syncovery 11.3.0 (32-bit)
- The function “Replace paths in profiles” is now case insensitive
- Filters for the profile overview now also look for the search term in the profiles’ base paths (in addition to the profile names)
- Fixes a few cases where cloud authentications might break and need to be re-done
- Fixes a problem that could sometimes cause cloud downloads from failing to start


Syncovery 11.2.5 (32-bit)
Fixed:
- a few cases where cloud authentications might break and need to be re-done
- a problem that could sometimes cause cloud downloads from failing to start


Syncovery 11.2.4 (32-bit)
- Change log not available for this version


Syncovery 11.2.3 (32-bit)
- Modernizes these services to work better with Windows Server 2025: Syncovery Remote Service, Guardian, and VSS Service
- Fixes an AV that could occur when a SyncoveryCL profile runner process terminated
- Can now encrypt with PGP after downloading from an Internet Protocol like SFTP
- Additional Improvements


Syncovery 11.2.2 (32-bit)
- Fixes verification of self-signed TLS certificates, which didn’t work with the new OpenSSL 3.4.1 in some cases


Syncovery 11.2.1 (32-bit)
- First release of Syncovery 11 in French
- Includes an updated SecGate connector and bug fixes


Syncovery 11.2.0 (32-bit)
- The “Install Service” button will now install SyncoveryCL.exe as the scheduler service, as opposed to SyncoveryService.exe. SyncoveryCL.exe will start up quicker and is more compliant and compatible with Windows Server 2025, as it does not use any hidden window handles and contains zero GUI related code – in contrast to SyncoveryService.exe, which doubles as a Background Scheduler with some basic GUI features (such as the tray icon and a status window).
- FTP libraries 2-4 now all use TLS Session Resumption for the data port, ensuring compatibility with the latest FTP server security requirements
- You can now make a profile abort if there is more than a certain number of Bytes to copy, by adding this PascalScript to the profile (the example enforces the limit of 5GB): function OnProfileStart:Boolean; begin Result:=true; UnattendedCopyMaxBytes:=5368709120; end;
- Various additional improvements


Syncovery 11.1.4 (32-bit)
- Change log not available for this version


Syncovery 11.1.3 (32-bit)
- Change log not available for this version


Syncovery 11.1.2 (32-bit)
- New OneDrive for Business connections now connect to the OneDrive again, rather than the PersonalCacheLibrary that Microsoft recently added
- Available memory checks that could prevent profiles from running now default to off on new installations
- Log file naming has been fixed related to the duration being part of the profile results
- Prevents invalid typecast exceptions that some customers reported while choosing a folder
- The AWS S3 region is now detected correctly for vpce.amazonaws.com endpoints
- The new option DeleteOnlyFilesWithoutArchiveFlag can be set to true via PascalScript, causing Syncovery to only delete files that do not have the Archive flag set


Syncovery 11.1.1 (32-bit)
- Change log not available for this version


Syncovery 11.1.0 (32-bit)
- When using the checkmark to create a new destination folder every time the job runs, you will now have the option to keep only a number of such created folders


Syncovery 11.0.21 (32-bit)
- Fixes an error message when trying to set up the Graph protocol with your own app registration ID as explained in the article: Registering Syncovery As Your Own App in Azure Portal


Syncovery 11.0.20 (32-bit)
- Increased speed when processing the “flat right side” option
- File list sorting/building speed should also be increased


Syncovery 11.0.19 (32-bit)
- Fixes occasional “Host not found” errors with Sharefile
- Reduces unnecessary logging when checking for the existence of folder stub files via S3


Syncovery 11.0.18 (32-bit)
- Fixes refreshing tokens when using Graph service accounts


Syncovery 11.0.17 (32-bit)
- Allows storage class selection for S3 compatible services
- Removes misleading messages in log files when using Graph service accounts


Syncovery 11.0.16 (32-bit)
- Fixes a possible error changing into an FTP directory after recent adjustments for OpenVMS


Syncovery 11.0.15 (32-bit)
- Waits longer after FTP/SFTP uploads if the destination file size does not match before erroring out and/or retrying
- Fixes an error “Failed to position source stream” when copying cloud to cloud and Syncovery tries to resume an incomplete upload after an interruption or detected file size mismatch


Syncovery 11.0.13 (32-bit)
- Change log not available for this version


Syncovery 11.0.12 (32-bit)
- Minor fixes on the Account Manager dialog


Syncovery 11.0.11 (32-bit)
- Miscellaneous improvements and speed optimizations


Syncovery 11.0.10 (32-bit)
- Fixes occasional incorrect updating of the file list cache and SmartTracking database after folder renames/moves


Syncovery 11.0.9 (32-bit)
- Fixes a bogus message about an “incompatible client” shown in the Monitoring Tool


Syncovery 11.0.8 (32-bit)
- Fixes a problem with non-recursive Backblaze B2 listings, where a bogus item named / would cause infinite listings. This bogus item is now included in the root folder by the B2 API (for unknown reasons).


Syncovery 11.0.7 (32-bit)
- Change log not available for this version


Syncovery 11.0.6 (32-bit)
- Fixes an error running Google Cloud Storage profiles


Syncovery 11.0.4 (32-bit)
- Adds Synology C2 Object Storage
- Implements Box replacements for leading and trailing spaces in folder names
- Cloud account details are now mentioned in profile log files
- Automatically disables folder timestamp adjustment if a cloud service doesn’t support it
- Prevents PCloud zero byte file replacements due to differing timestamps
- When choosing “Adjust timestamp only” in conjunction with “Binary Comparison”, the new version will now check the contents before adjusting file times. If the files don’t match, the Preview will show BADCOMP.
- Fixes “Exception deleting obsolete metadata file: Action not possible while processing a multithreaded listing”
- Additional improvements


Syncovery 11.0.3 (32-bit)
- Fixes possibly missed folder creations when a profile has multiple FTP or SFTP cloud destinations


Syncovery 11.0.2 (32-bit)
- Visual fixes
- Improved the new Exact Mirror behaviors if there are newer files on the destination side
- Allows skipping the phase “Detecting moved folders”
- Additional minor fixes


Syncovery 11.0.1 (32-bit)
- Implements support for managed cloud accounts on Internet dialog when invoked from the “Additional Destination” dialog
- Improves Internet dialog behavior for existing profiles with non-managed accounts, mostly for Backblaze B2
- Fixes subfolders sometimes not being created when using additional destinations. As an additional fallback, Syncovery will now also create folders via Internet Protocols spontaneously if an upload fails because the folder does not exist.
- Now recognizes SFTP error 10, which Syncovery’s own SFTP server uses to signal that a folder does not exist


Syncovery 11.0.0 (32-bit)
- Redesigned profile editor dialog
- Redesigned Internet Protocol Settings dialog
- Redesigned Exact Mirror configuration dialog with new features for high availability server replication
- New Account Manager for Cloud/Internet Protocol Accounts (see Internet dialog or File menu)
- New File Integrity Scanner (under Verifiations->Integrity in the profile)
- Copies cloud to cloud without using local temporary files
- New, improved algorithm for detecting moved and renamed folders
- Allows specifying separate versioning folders for the left and right sides
- Now includes an SFTP Server as part of the Syncovery Remote Service that can be used for peer to peer synchronization
- The context menu in the Profile Overview allows you to choose a color for each profile
- Notes/comments can be entered on the Information tab sheet in each profile. These will appear as a tooltip hint when hovering over a profile on the Profile Overview.
- Contains an updated SecureBlackBox library for improved SSH/SFTP and PGP compatibility
- When using compressed packages with multiple files per archive, Syncovery can now limit the number of packages kept at the destination
- An option was added to automatially rename duplicate files on Google Drive
- Separate login credentials can now be specified for communication with the Syncovery Remote Service, so that the main account used for copying can now be a read-only account
- Miscellaneous visual improvements have been made