The Dude 7.14

What's new in this version:

- rose-storage - moved SMB service to the RouterOS bundle
- smb - removed legacy SMB service (replaced with newer and faster ROSE SMB service, compatible with SMB 2.1, SMB 3.0 and SMB 3.1.1)
- 6to4 - make "ipsec-secret" sensitive parameter
- api - improved REST API stability when processing invalid requests
- api - properly return SNMP OIDs when requested
- arm - improved system stability when using microSD on RB1100Dx4
- arp - added ARP status
- bgp - allow to leak routes between local VRFs
- bridge - added MLAG support for MSTP bridges
- bridge - avoid per-VLAN host flushing on HW offloaded bridge
- bridge - fixed auto "path-cost" for bonding interfaces (introduced in v7.13)
- bridge - fixed MLAG connection after peer-link flap (introduced in v7.13)
- bridge - fixed packet forwarding after changing HW offloaded bridge interface settings in certain cases (introduced in v7.13)
- bridge - improved bridge VLAN configuration validation
- bridge - improved configuration speed on large VLAN setups
- bridge - improved protocol-mode MSTP functionality
- bridge - improved protocol-mode STP and RSTP functionality
- bridge - make "point-to-point=yes" default value for non-wireless bridge ports
- bridge - removed "mst-config-digest" from MSTI menu
- bridge - try to set wireless bridge ports as edge ports automatically
- bth - added simple "Back To Home Users" manager under IP/Cloud menu
- calea - improved system stability when adding bridge rule without "calea" package installed
- certificate - improved certificate validation performance
- console - added ":tolf" and ":tocrlf" commands for converting line break to/from LF or CRLF
- console - added "show-at-cli-login" option to display a note before telnet login
- console - added missing "where" clause for "/ipv6/firewall/filter" table print command
- console - do not accept negative or too large values for ":delay" command
- console - do not allow to use out-of-range values for time type fields
- console - fix configuration export when user does not have a "sniff" policy
- console - fixed delayed output from ":grep" command in certain cases
- console - fixed incorrect behavior of ":onerror" command in certain cases
- console - hint on reset command help that ".rsc file" is required for "run-after-reset" parameter
- console - improved editor functionality in full screen mode
- console - improved stability when using autocomplete with "export"
- console - increased maximum file content length that can be managed through command line to 60 KB
- console - updated copyright notice
- container - improved VETH interface management responsiveness and reliability
- container - restrict "/container/shell" menu for users without "write" permissions
- defconf - added log about configuration reset due to pressed reset button
- defconf - fixed Audience scanning-for-wps-ap timeout
- defconf - fixed configuration script on KNOT devices if "ppp-out" interface is removed
- defconf - fixed firewall rule for IPv6 UDP traceroute
- defconf - fixed wifi configuration if interface MAC address is changed
- defconf - improved wifi interface detection after upgrade
- defconf - increased LTE interface wait time
- defconf - updated health settings on configuration revert
- defconf - use "fq_codel" queue as default interface queue for wired ports on LTE devices
- dhcpv6-client - install dynamic IPv6 blackhole routes in corresponding routing-table
- dhcpv6-client - updated error logging when multiple prefixes received on renew
- disk - added exFAT and NTFS mount/read/write support
- disk - added global disk "settings" menu
- disk - fixed changing settings on some GPT formatted disks
- disk - properly unmount disk when it is disconnected
- dns - do not add new entries to cache if "cache-size" is reached
- dns - fixed domain name lookup resolving for internal services
- ethernet - fixed issue with default interface names for CRS310-8G+2S+ in rare cases
- ethernet - improved cable-test reliability for hAP ax3 PoE out port
- ethernet - resolved minor memory leak while processing packets
- fetch - added "head" option for "http-method"
- fetch - added "patch" option for "http-method"
- fetch - allow specifying link-local address in FTP mode
- fetch - allow to use certificate and check-certificate parameters only in HTTPS mode
- fetch - do not require "content-length" for HTTP (introduced in v7.13)
- fetch - fixed DNS resolving when domain has only AAAA entries (introduced in v7.13)
- fetch - fixed fetch execution when unexpected data is received in HTTP payload
- fetch - fixed fetch when using "src-path" with HTTP/HTTPS modes (introduced in v7.13)
- fetch - fixed fetch when using "src-path" with SFTP mode (introduced in v7.13)
- fetch - fixed incorrect "src-path" error message when "upload=yes"
- fetch - fixed IPv4 address logging (introduced in v7.13)
- fetch - improved fetch stability in SFTP mode
- fetch - improved file download stability with HTTP/HTTPS modes
- fetch - less verbose logging
- fetch - print all "Set-Cookies" headers in response
- fetch - treat any 2xx HTTP return code as success (introduced in v7.13)
- filesystem - improved filesystem integrity for several RB3011 units with automatic firmware upgrade
- firewall - added "creation-time" parameter for IPv6 address list entries
- firewall - fixed underlying CAPsMAN tunnel reusing packet marks of encapsulated packets
- firewall - fixed underlying VXLAN/EoIP tunnel reusing packet marks of encapsulated packets
- firewall - increased default "udp-timeout" value from 10s to 30s
- health - added limited manual control over fans for CCR1016r2, CCR1036r2 devices
- health - changed default "fan-min-speed-percent" from 0% to 12%
- health - improved fan control on CRS3xx and CCR1016-12S-1S+r2
- health - show voltage when powering KNOT R through Micro-USB
- health - updated health properties for CCR1016r2, CCR1036r2 devices
- iot - added bluetooth whitelist wildcard asterisk support
- iot - added LoRa CUPs protocol support
- iot - fixed modbus partial frame reception issue
- iot - improved LoRa LNS
- iot - improved modbus Tx/Rx switching behaviour
- iot - improvements to GPIO behavior on boot
- iot - improvements to LoRa CUPS
- iot - removed bluetooth whitelist maximum entry limit of 8
- ipv6 - made "valid" and "lifetime" parameters dynamic for SLAAC IPv6 addresses
- isis - show passive interface active levels
- l3hw - fixed IPv6 host offloading in certain cases
- l3hw - fixed neighbor offloading after link flap
- l3hw - preserve offloading for VLANs when bridge ports are down
- leds - added "dark-mode" functionality for hAP ax3 and Chateau ax series devices
- leds - do not show LTE connection state/mode using RGB power LED from configless LTE modems
- leds - fixed "type=on" LED behaviour after reboot
- leds - fixed default LTE LED configuration for wAPR-2nD
- leds - fixed modem LED indication for SXT LTE 3-7
- leds - fixed wireless type of LED triggers for routers using WiFi package
- lte - added "at-chat" support for Sierra Wireless EM9293 5G modem
- lte - added AT channel support for Quectel EM120K-GL modem
- lte - added redial timer when the MBIM modem fails to register or does not receive APN activation notification
- lte - don't duplicate primary band in 5G SA mode for chateau 5G
- lte - fixed "use-peer-dns" setting for EC200A modem
- lte - fixed an issue for EC200A modem that IPv6 address could be added as IPv4 address
- lte - fixed APN authentication for FG621-EA modem
- lte - fixed MBIM interface enabling for Quectel EC25 modem (introduced in v7.13)
- lte - fixed Simcom modem support in 0x9000; 0x9002, 0x9002; 0x901a and 0x901b USB compositions
- lte - fixed Simcom modem support in 0x9001 USB composition
- lte - fixed support for config-less modem detection (introduced in v7.13)
- lte - fixed USB mode switch and initialization race condition for configless USB modems
- lte - improved FG621-EA modem firmware upgrade
- lte - improved modem recovery after failed IPv4 configuration
- lte - improved support for "ACER" and "MSFT" branded EM12-G modems
- lte - optimized "at-chat" response reading
- lte - refactored AT command control for AT modems
- modem - fixed SMS removal (introduced in v7.13)
- modem - improved stability when performing modem FOTA upgrade
- mpls - fixed VPN fragmentation when forwarding IP traffic
- netinstall-cli - check package and device architecture before formatting
- ovpn - added support for pushing routes
- ovpn - improved "push-routes" option handling when large amount of routes is specified
- ovpn - improved key-renegotiation process
- ovpn - improved OVPN configuration file import process
- ovpn - improved system stability when using HW encryption on ARM64 devices (introduced in v7.13)
- ovpn - limit the maximum length for "push-routes" up to 1400 characters
- package - added "size" property
- package - reduced "wireless" package size for ARM, ARM64, MIPSBE, MMIPS devices
- package - reduced package size for SMIPS
- poe-out - driver optimization for AF/AT controlled boards
- poe-out - fixed "power-cycle" for CRS354-48P-4S+2Q+ device (introduced in v7.13)
- poe-out - improved 802.3at classification and measurement accuracy
- poe-out - improved cable test for hAP ac3 and hAP ax3 devices
- poe-out - improved PoE out reliability on routers with a single PoE out interface
- port - fixed support for USB/serial adapters (introduced in v7.13)
- port - removed bogus serial port on RB750Gr3, RB760iGS and RBM11G devices
- ppp - added support for "WISPr-Session-Terminate-Time" RADIUS attribute
- ppp - log an error when IPv6 DHCP pool is exhausted
- ptp - added "aes67" and "smpte" profiles
- ptp - added configurable "domain" and "priority2" parameters
- ptp - added support for Management message forwarding in BC
- ptp - fixed "default" and "g8275.1" profiles go into "slave" instead of "uncalibrated" state
- ptp - fixed default values for "802.1as" profile
- ptp - fixed flags in Announce message
- ptp - fixed potential error in packet exchange
- ptp - make clock go into grandmaster state if slave port goes down
- qos-hw - fixed "tx-queue7-packet" counter
- route - fixed gateways of locally imported vpnv4 routes
- route - improved route print "count-only" process speed
- route - improved stability on route table lookup
- route-filter - added option to set "isis-ext-metric"
- route-filter - fixed AS path matchers when input and output chains are used
- routerboard - added "reset-button" support for RBwAPR-2nD device
- sfp - added support for modules requiring single byte I2C read transactions
- sfp - fixed corrupted Tx traffic at 10Gbps rate on CCR2004-16G-2S+ in rare cases
- sfp - fixed corrupted Tx traffic at 10Gbps rate on RB4011 in rare cases
- sfp - improve high-power SFP module initialization
- sfp - improved combo-sfp handling for CRS328-4C-20S-4S+
- sfp - improved link establishment for RB4011 devices
- smb - added option to specify SMB service mode as "auto"
- sms - fixed SMS inbox for FG621-EA modem (introduced in v7.13)
- sms - fixed SMS sending from WinBox and WebFig (introduced in v7.13)
- sms - improved system stability when working with SMS
- sms - increased SMS read timeout
- snmp - added "bgpLocalAs" and "bgpIdentifier" OID reporting
- snmp - fixed "bgpPeerFsmEstablishedTime" OID reporting
- snmp - hide "MikroTik" in LLDP MIB when branding with hide SNMP option is used
- snmp - updated timeout log
- ssh - improved SSH performance on ARM, MIPS, MMIPS, SMIPS and TILE devices
- ssh - refactored SSH service internal processes
- sstp - added support for "aes256-gcm-sha384" encryption
- sstp - improved system stability for PPC devices
- supout - added PTP section
- switch - fixed Ethernet disable/enable for CRS310-8G+2S+ devices
- switch - fixed reserved multicast receive on Atheros-8327, QCA8337 switches for R/STP bridge
- switch - improved 100G interface stability for 98DX4310 and 98DX8525 switches
- switch - minimise potential packet overflows on CRS354
- system - changed build time format according to ISO standard
- system - expose "lo" and "vrf" interfaces
- system - fixed "cpu-frequency" for CRS3xx ARM devices
- system - improved memory allocation for ARM64 devices
- system - improved RAM allocation for L009UiGS-RM
- system - improved system stability when processing packets in FastPath (introduced in v7.13)
- system - properly assign destination port for HTTP/S connections initiated by the router (introduced in v7.13)
- system - properly close HTTP/S connections initiated by the router
- system - provide more precise "total-memory" value for ARM devices
- system - provide more precise "total-memory" value under "System/Resources" menu for L009 and hAP ax lite routers
- tftp - improved invalid request processing
- timezone - updated timezone information from "tzdata2023d" release
- tr069 - don't duplicate cellular info in "X_MIKROTIK_5G" nodes when connected in NR SA mode
- tr069 - fixed bandwidth test
- tr069-client - show 5G signal info in X_MIKROTIK_5G nodes only for 5G NSA bands
- traffic-flow - use 64bit counters for v9 and IPFIX flows
- traffic-generator - improved system stability when receiving bogus traffic
- usb - show "Supermicro CDC" adapter as Ethernet interface
- vlan - fixed non-running VLAN interface after failed MTU change
- vrf - prevent VRF interface name collision with interface lists
- vxlan - fixed underlying tunnel reusing routing marks of encapsulated packets
- webfig - fixed routing table filter under "IP/Routes" menu
- webfig - fixed setting the user's password
- webfig - fixed showing WireGuard peers
- webfig - improved stability when adding new entries under "IP/Routes" menu
- wifi - added "station-pseudobridge" interface mode
- wifi - fixed issue with setting country profile (introduced in v7.13.1)
- wifi - improved handling of CAP connections in dual CAPsMAN scenario
- wifi - increased value for SAE retransmit period to 3s to improve WPA3 compatibility with IoT client devices
- wifi - use "Latvia" as the default value for "country" property
- wifi - use correct CAP identity for interface name provisioning after it has been changed by remote-cap/set-identity
- wifi-qcom - enable display of regulatory information on L11,L22 devices
- wifi-qcom - fixed new connections, when maximum supported number of MAC addresses behind connected station-bridges is reached
- wifi-qcom - improve system stability for L11, L22 devices
- wifi-qcom - improved memory allocating process
- wifi-qcom - improved regulatory compliance for L11, L22 devices
- wifi-qcom - improved system stability when using FastPath (introduced in v7.13)
- winbox - added "accept-protocol-version" parameter to the L2TP server settings
- winbox - added "mode-button" and "switch" menus for L41G-2axD&FG621-EA
- winbox - added "Name" parameter under "Tools/Netwatch" menu
- winbox - added "page-refresh" setting to the Graphing settings
- winbox - added "Port Cost Mode" setting under "Bridge" menu
- winbox - added "VRF" parameter under "Tools/Ping" menu
- winbox - added "x25519" argument for "DH Group" parameter under "IP/IPsec/Profiles" menu
- winbox - added missing "Protocol" arguments under "IPv6/Firewall" menu
- winbox - added missing monitoring properties under "WireGuard/Peers" menu
- winbox - added Preboot Etherboot settings to the System/RouterBOARD/Settings menu
- winbox - do not show USB settings for CRS devices that does not need it
- winbox - fixed "Bridge Cost" range under "Interfaces/VPLS" menu
- winbox - fixed "Password" button under "Quick Set" menu
- winbox - improved connection speed and reliability
- winbox - improved route table automatic refresh process for static routes
- winbox - improved status values under "System/PTP" menu
- winbox - improved system stability with large packets
- winbox - include "te-tunnel" parameter in VPLS interface monitor
- winbox - properly validate "passthrough-subnet-size" in the LTE APN settings
- winbox - remove "Root Bridge ID" property under "Bridge/MSTIs" menu
- winbox - removed "sfp all" option from combo port settings
- winbox - renamed "Wireless Table" menu to "Wifi"
- winbox - show "routing-table" column under IP/Route menu by default
- winbox - show all columns under "Routing/PIM SM/Static RP" menu by default
- wireguard - do not allow to use multiple WireGuard interfaces on the same "listen-port"
- wireguard - optimised and improved WireGuard service logging
- x86 - fixed VLAN tagged packet transmit for igb (introduced in v7.12)